dmesg - 2013-04-16 14:34
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-279.11.1.el6.centos.plus.x86_64 (mockbuild@c6b7.bsys.dev.centos.org) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Tue Oct 16 22:42:15 UTC 2012
Command line: ro root=/dev/mapper/vg_scnlan163-lv_root nomodeset rd_NO_LUKS rd_LVM_LV=vg_scnlan163/lv_root LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_scnlan163/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet selinux=0
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable)
BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data)
BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000011bfff000 (usable)
DMI 2.3 present.
SMBIOS version 2.3 @ 0xF4F40
DMI: HP ProLiant DL380 G4, BIOS P51 04/26/2006
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x11bfff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0E0000000 mask FE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdfff3 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000dfff3000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfff3000 page 4k
kernel direct mapping tables up to dfff3000 @ 8000-e000
init_memory_mapping: 0000000100000000-000000011bfff000
0100000000 - 011be00000 page 2M
011be00000 - 011bfff000 page 4k
kernel direct mapping tables up to 11bfff000 @ c000-13000
RAMDISK: 37164000 - 37fef2e4
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000dfff3300 0004C (v01 HP P51 00000002 Ò? 0000162E)
ACPI: FACP 00000000dfff3380 000F4 (v03 HP P51 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI: DSDT 00000000dfff3480 02D62 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000dfff3100 00040
ACPI: SPCR 00000000dfff3140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000dfff31c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: APIC 00000000dfff3200 000C2 (v01 HP 00000083 00000002 00000000)
ACPI: SSDT 00000000dfff8000 004C9 (v01 HP SSDTP 00000001 INTL 20030228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000011bfff000
Bootmem setup node 0 0000000000000000-000000011bfff000
NODE_DATA [000000000000e000 - 0000000000041fff]
bootmap [0000000000042000 - 00000000000657ff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 011bfff000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00020148e4] TEXT DATA BSS ==> [0001000000 - 00020148e4]
#3 [0037164000 - 0037fef2e4] RAMDISK ==> [0037164000 - 0037fef2e4]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [0002015000 - 00020150dc] BRK ==> [0002015000 - 00020150dc]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 000000e000] PGTABLE ==> [000000c000 - 000000e000]
found SMP MP-table at [ffff8800000f4f80] f4f80
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 4543MB)
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0011bfff
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000dfff3
0: 0x00100000 -> 0x0011bfff
On node 0 totalpages: 1032080
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3837 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899115 pages, LIFO batch:31
Normal zone: 1568 pages used for memmap
Normal zone: 113119 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec84000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec84000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec84400] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec84400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 120
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfff3000 - 00000000dfffb000
PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94424 r8192 d24360 u262144
pcpu-alloc: s94424 r8192 d24360 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016071
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_scnlan163-lv_root nomodeset rd_NO_LUKS rd_LVM_LV=vg_scnlan163/lv_root LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M rd_LVM_LV=vg_scnlan163/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet selinux=0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3837904k/4653052k available (5181k kernel code, 524732k absent, 290416k reserved, 7139k data, 1260k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:2048
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 3400.155 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.31 BogoMIPS (lpj=3400155)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21139 entries in 83 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(TM) CPU 3.40GHz stepping 0a
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (27198.74 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support.
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x2000-0x201f]
pci 0000:00:1d.1: reg 20: [io 0x2020-0x203f]
pci 0000:00:1d.2: reg 20: [io 0x2040-0x205f]
pci 0000:00:1d.3: reg 20: [io 0x2060-0x207f]
pci 0000:00:1d.7: reg 10: [mem 0xfbef0000-0xfbef03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x0900-0x097f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0800-0x083f] claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0x0500-0x050f]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 02-04]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:01.0: reg 10: [mem 0xfddf0000-0xfddfffff 64bit]
pci 0000:03:01.0: PME# supported from D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.1: reg 10: [mem 0xfdde0000-0xfddeffff 64bit]
pci 0000:03:01.1: PME# supported from D3hot D3cold
pci 0000:03:01.1: PME# disabled
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:02:00.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:03.0: reg 10: [mem 0xfdef0000-0xfdef1fff 64bit]
pci 0000:04:03.0: reg 18: [io 0x4000-0x40ff]
pci 0000:04:03.0: reg 1c: [mem 0xfde80000-0xfdebffff 64bit]
pci 0000:04:03.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:03.0: supports D1
pci 0000:02:00.2: PCI bridge to [bus 04-04]
pci 0000:02:00.2: bridge window [io 0x4000-0x4fff]
pci 0000:02:00.2: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:02:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.2: PME# supported from D0 D3hot D3cold
pci 0000:05:00.2: PME# disabled
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 05-0c]
pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:02.0: reg 10: [mem 0xfdff0000-0xfdffffff 64bit]
pci 0000:06:02.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:06:02.0: PME# supported from D3hot D3cold
pci 0000:06:02.0: PME# disabled
pci 0000:05:00.0: PCI bridge to [bus 06-09]
pci 0000:05:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:05:00.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.2: PCI bridge to [bus 0a-0c]
pci 0000:05:00.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:05:00.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:05:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:03.0: reg 10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff]
pci 0000:01:03.0: reg 18: [mem 0xfbff0000-0xfbff0fff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10: [io 0x1800-0x18ff]
pci 0000:01:04.0: reg 14: [mem 0xfbfe0000-0xfbfe01ff]
pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff]
pci 0000:01:04.2: reg 14: [mem 0xfbfd0000-0xfbfd07ff]
pci 0000:01:04.2: reg 18: [mem 0xfbfc0000-0xfbfc1fff]
pci 0000:01:04.2: reg 1c: [mem 0xfbf00000-0xfbf7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfcffffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXD._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1d.0: address space collision: [io 0x2000-0x201f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff]
pci 0000:00:1d.0: can't reserve [io 0x2000-0x201f]
pci 0000:00:1d.1: address space collision: [io 0x2020-0x203f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff]
pci 0000:00:1d.1: can't reserve [io 0x2020-0x203f]
pci 0000:00:1d.2: address space collision: [io 0x2040-0x205f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff]
pci 0000:00:1d.2: can't reserve [io 0x2040-0x205f]
pci 0000:00:1d.3: address space collision: [io 0x2060-0x207f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff]
pci 0000:00:1d.3: can't reserve [io 0x2060-0x207f]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0077]
pnp 00:01: [io 0x0408-0x040f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0700-0x071f]
pnp 00:01: [io 0x0800-0x083f]
pnp 00:01: [io 0x0900-0x097f]
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0c80-0x0c83]
pnp 00:01: [io 0x0cd4-0x0cd7]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x02f8-0x02ff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:1d.0 BAR 4 [io 0x0000-0x001f]
pnp 00:01: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:1d.1 BAR 4 [io 0x0000-0x001f]
pnp 00:01: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:1d.2 BAR 4 [io 0x0000-0x001f]
pnp 00:01: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:1d.3 BAR 4 [io 0x0000-0x001f]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 7]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io 0x0060]
pnp 00:04: [io 0x0064]
pnp 00:04: [irq 1]
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: [io 0x002e-0x002f]
pnp 00:06: [io 0x004e-0x004f]
pnp 00:06: [io 0x0220-0x025f]
pnp 00:06: [io 0x0280-0x029f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:07: [irq 4]
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: [io 0x03f2-0x03f5]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0800-0x083f] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:02.0: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:06.0: BAR 15: assigned [mem 0xf0100000-0xf01fffff pref]
pci 0000:00:1e.0: BAR 15: assigned [mem 0xf0200000-0xf02fffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0xf0300000-0xf03003ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0xf0300000-0xf03003ff] (PCI address [0xf0300000-0xf03003ff]
pci 0000:00:1d.0: BAR 4: assigned [io 0x5000-0x501f]
pci 0000:00:1d.0: BAR 4: set to [io 0x5000-0x501f] (PCI address [0x5000-0x501f]
pci 0000:00:1d.1: BAR 4: assigned [io 0x5020-0x503f]
pci 0000:00:1d.1: BAR 4: set to [io 0x5020-0x503f] (PCI address [0x5020-0x503f]
pci 0000:00:1d.2: BAR 4: assigned [io 0x5040-0x505f]
pci 0000:00:1d.2: BAR 4: set to [io 0x5040-0x505f] (PCI address [0x5040-0x505f]
pci 0000:00:1d.3: BAR 4: assigned [io 0x5060-0x507f]
pci 0000:00:1d.3: BAR 4: set to [io 0x5060-0x507f] (PCI address [0x5060-0x507f]
pci 0000:02:00.2: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io disabled]
pci 0000:02:00.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:02:00.0: bridge window [mem pref disabled]
pci 0000:04:03.0: BAR 6: assigned [mem 0xf0000000-0xf003ffff pref]
pci 0000:02:00.2: PCI bridge to [bus 04-04]
pci 0000:02:00.2: PCI bridge to [bus 04-04]
pci 0000:02:00.2: bridge window [io 0x4000-0x4fff]
pci 0000:02:00.2: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:02:00.2: bridge window [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-04]
pci 0000:00:02.0: PCI bridge to [bus 02-04]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf00fffff pref]
pci 0000:05:00.0: BAR 15: assigned [mem 0xf0100000-0xf01fffff pref]
pci 0000:06:02.0: BAR 6: assigned [mem 0xf0100000-0xf010ffff pref]
pci 0000:05:00.0: PCI bridge to [bus 06-09]
pci 0000:05:00.0: PCI bridge to [bus 06-09]
pci 0000:05:00.0: bridge window [io disabled]
pci 0000:05:00.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:05:00.0: bridge window [mem 0xf0100000-0xf01fffff pref]
pci 0000:05:00.2: PCI bridge to [bus 0a-0c]
pci 0000:05:00.2: PCI bridge to [bus 0a-0c]
pci 0000:05:00.2: bridge window [io disabled]
pci 0000:05:00.2: bridge window [mem disabled]
pci 0000:05:00.2: bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 05-0c]
pci 0000:00:06.0: PCI bridge to [bus 05-0c]
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff pref]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf0200000-0xf021ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf0220000-0xf022ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfcffffff]
pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf02fffff pref]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:02:00.2: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: setting latency timer to 64
pci 0000:05:00.0: setting latency timer to 64
pci 0000:05:00.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:05: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:05: resource 2 [mem 0xf0100000-0xf01fffff pref]
pci_bus 0000:06: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:06: resource 2 [mem 0xf0100000-0xf01fffff pref]
pci_bus 0000:01: resource 0 [io 0x1000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf02fffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT A disabled
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.3: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT D disabled
pci 0000:02:00.0: rerouting interrupts for [8086:0329]
pci 0000:02:00.2: rerouting interrupts for [8086:032a]
pci 0000:05:00.0: rerouting interrupts for [8086:0329]
pci 0000:05:00.2: rerouting interrupts for [8086:032a]
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14892k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1351585655.562:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7525
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 434528FD33234B80
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [0] registered
acpiphp: Slot [4294967295] registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: SSDT 00000000dfff9000 002DA (v01 HP SSDT0 00000001 INTL 20030228)
ACPI: SSDT 00000000dfff9300 002DA (v01 HP SSDT1 00000001 INTL 20030228)
ACPI: SSDT 00000000dfffa200 002DA (v01 HP SSDT6 00000001 INTL 20030228)
ACPI: SSDT 00000000dfffa500 002DA (v01 HP SSDT7 00000001 INTL 20030228)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbef0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-279.11.1.el6.centos.plus.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-279.11.1.el6.centos.plus.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-279.11.1.el6.centos.plus.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-279.11.1.el6.centos.plus.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-279.11.1.el6.centos.plus.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2012-10-30 08:27:37 UTC (1351585657)
Initalizing network drop monitor service
Freeing unused kernel memory: 1260k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 944k freed
Freeing unused kernel memory: 1720k freed
dracut: dracut-004-284.el6_3.1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
Refined TSC clocksource calibration: 3400.120 MHz.
Switching to clocksource tsc
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3
usb 5-2: new low speed USB device number 2 using uhci_hcd
ata1.00: ATAPI: TSSTcorpCD-ROM TS-L162C, N204, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TSSTcorp CD-ROM TS-L162C N204 PQ: 0 ANSI: 5
usb 5-2: New USB device found, idVendor=0557, idProduct=2304
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: ATEN-COMPOSITE
usb 5-2: Manufacturer: Kb
usb 5-2: configuration #1 chosen from 1 choice
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
input: Kb ATEN-COMPOSITE as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
generic-usb 0003:0557:2304.0001: input,hidraw0: USB HID v1.00 Keyboard [Kb ATEN-COMPOSITE] on usb-0000:00:1d.3-2/input0
HP CISS Driver (v 3.6.28-RH1)
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
cciss 0000:04:03.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
cciss 0000:04:03.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date.
input: Kb ATEN-COMPOSITE as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5
generic-usb 0003:0557:2304.0002: input,hidraw1: USB HID v1.00 Mouse [Kb ATEN-COMPOSITE] on usb-0000:00:1d.3-2/input1
IRQ 51/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
cciss 0000:04:03.0: cciss0: at PCI 0000:04:03.0 IRQ 51 using DAC
cciss/c0d0: p1 p2
cciss/c0d1: p1
dracut: Scanning devices for LVM logical volumes vg_scnlan163/lv_root vg_scnlan163/lv_swap
dracut: inactive '/dev/vg_scnlan163/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_scnlan163/lv_home' [13.53 GiB] inherit
dracut: inactive '/dev/vg_scnlan163/lv_swap' [3.81 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_scnlan163-lv_root
dracut: Switching root
udev: starting version 147
EDAC MC: Ver: 2.1.0 Oct 16 2012
Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
sr 0:0:0:0: Attached scsi generic sg0 type 5
hpwdt 0000:01:04.0: This server does not have an iLO2+ ASIC.
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
tg3.c:v3.122 (December 7, 2011)
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
tg3 0000:03:01.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
tg3 0000:03:01.0: eth0: Tigon3 [partno(N/A) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:18:fe:73:0a:05
tg3 0000:03:01.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:01.0: eth0: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:03:01.0: eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
tg3 0000:03:01.1: PCI INT B -> GSI 26 (level, low) -> IRQ 26
tg3 0000:03:01.1: eth1: Tigon3 [partno(N/A) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:18:fe:73:0a:04
tg3 0000:03:01.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:01.1: eth1: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:01.1: eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
alloc irq_desc for 78 on node -1
alloc kstat_irqs on node -1
tg3 0000:06:02.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78
tg3 0000:06:02.0: eth2: Tigon3 [partno(P9AAC) rev 3003] (PCI:66MHz:32-bit) MAC address 00:18:71:4d:c6:2c
tg3 0000:06:02.0: eth2: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0])
tg3 0000:06:02.0: eth2: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:06:02.0: eth2: dma_rwctrl[763f0000] dma_mask[64-bit]
EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
JFS: nTxBlock = 8192, nTxLock = 65536
Adding 3997688k swap on /dev/mapper/vg_scnlan163-lv_swap. Priority:-1 extents:1 across:3997688k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:03:01.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:03:01.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS (dm-5): Mounting Filesystem
XFS (dm-5): Ending clean mount
XFS (dm-6): Mounting Filesystem
XFS (dm-6): Ending clean mount
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
XFS (dm-6): Mounting Filesystem
XFS (dm-6): Ending clean mount
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
XFS (dm-5): Mounting Filesystem
XFS (dm-5): Ending clean mount
udev: starting version 147